Services - Steel Piling
Since we do both Commercial and Residential work the products we use can be customized to any situation. If you need further information or have any questions, please contact us, we would be happy to assist you.
Pre-Construction Piers
These are helical piers engineered to prevent foundation failure; they are installed before the foundation footings are poured. Specifically, used in poor soil conditions, such as soft and expansive soils.
Push Piers
Hydraulically driven to lift failing homes and structures, this pier system consists of sections of thermo-plastic coated steel pipe that is environmentally safe. The piers are point bearing, attached to the footing under the foundation, and driven with a hydraulic ram through unstable soils to load bearing strata.
Each pier is then individually load tested, and the structure is stabilized with a patented uniform system to insure maximum practical recovery.
This system, like the Helical Pier system, has been shown to successfully support structures in virtually all soil conditions, and can be used for stabilizing foundations and slabs built on questionable soil, as well as seismic protection, tieback anchoring, dead man anchoring, and fixture anchoring. It may be successfully installed even in tight areas.
Helical Foundation Supports
Helical piers are screw piles with steel shafts. The lead section, with one or more helixes attached, provides the needed load bearing capacity. The piers are screwed into the ground with a hydraulic torque motor, and extensions without helixes are added during driving. For the helical pier application, load capacity is determined from the torque measurements obtained from the installation equipment.
This system has been shown to successfully support structures in virtually all soil conditions, and can be used for stabilizing foundations and slabs built on questionable soil, as well as seismic protection, tieback anchoring, dead man anchoring, and fixture anchoring. Environmentally safe, these piers may also be successfully installed in tight areas.
Wall Tie-Back Anchoring Systems
Tiebacks are steel helical piers hydraulically screwed through the soil passed the area of failure into load bearing soil. Tiebacks are commonly used to help support and stabilize foundation walls as seen above. We also offer Sea Wall Tie-backs.
Helical Soil Nails
An anchoring system used to reinforce retaining walls, for slope stabilization, and excavation support.
